HAAS TM 2P Vertical milling center
The vertical milling center HAAS TM 2P was produced in 2015.
Technical data of the CNC milling machine HAAS TM 2P :
– man-hours: 11,000 h
Movement ranges:
– X axis: 1016 mm
– Y axis: 406 mm
– Z axis: 406 mm
– from the end of the spindle to the table (maximum): 508 mm
– table spindle to table (minimum): 102 mm
Spindle:
– maximum power: 7.5 hp, 5.6 kW
– maximum speed: 6000 rpm
– maximum torque: 1200 rpm
– drive type: Direct Speed, Belt Drive, Direct Speed, Belt Drive
– cone: CT or BT 40
– bearing lubrication: Grease Packed
– cooling: Air Cooled
Table
– length: 1466 mm
– width: 267 mm
– T-slot width: 16 mm
– distance from the center of the T-slots: 102 mm
– number of standard tables with T-slots: 3
– maximum table load (evenly distributed): 454 kg
Feeder:
– maximum cutting: 10.2 m / min.
– run-on speed on X: 10.2 m / min.
– run-on speed on Y: 10.2 m / min.
– run-on speed on Z: 10.2 m / min.
Axle motors:
– maximum thrust X: 8896 N
– maximum Y pressure: 8896 N
Dmlu39d2q
– maximum pressure Z: 8896 N
Tool magazine:
– type: Carousel
– capacity: 10
– maximum tool diameter (full adjacent socket): 89 mm
– maximum tool weight: 5.4 kg
– tool change time: 5.7 s
– chip-chip tool change time: 6.5 s
Transport box dimensions:
– national palette: 331 cm x 199 cm x 249 cm
– export pallet: 331 cm x 199 cm x 249 cm
– HAAS TM-2P machine weight: 2359 kg
Machine Data | |||||||||||||||
Machine ID | WM226664 | ||||||||||||||
Machine type | Vertical milling center | ||||||||||||||
Manufacturer | HAAS | ||||||||||||||
Model | TM 2P | ||||||||||||||
Year of manufacture | 2015 | ||||||||||||||
Condition | good (used) | Price and Location | |||||||||||||
Price | 38.5000 | ||||||||||||||
Currency | € | ||||||||||||||
Location | Jelenia Góra , Poland | ||||||||||||||
Seller | |||||||||||||||
| |||||||||||||||
Add To Favorites |